1x19 Strand Stainless Steel Wire Rope, 316 Marine Grade
1x19 Stainless Steel Cable
Highest quality marine grade stainless steel cable from 1.5mm diameter to 16mm diameter
| Diameter (mm) | Break Load (Kg) | SWL (Kg) | Price (per metre) | Code | |
|---|---|---|---|---|---|
| 1.5mm 1x19 : | 1.5 | 180 | 30 | £0.26 | WS19-015 |
| 2mm 1x19 : | 2 | 320 | 53 | £0.32 | WS19-020 |
| 3mm 1x19 : | 3 | 720 | 120 | £0.57 | WS19-030 |
| 4mm 1x19 : | 4 | 1280 | 213 | £0.92 | WS19-040 |
| 5mm 1x19 : | 5 | 2000 | 333 | £1.39 | WS19-050 |
| 6mm 1x19 : | 6 | 2880 | 480 | £2.06 | WS19-060 |
| 8mm 1x19 : | 8 | 4640 | 773 | £3.82 | WS19-080 |
| 10mm 1x19 : | 10 | 7250 | 1208 | £5.75 | WS19-100 |
| 12mm 1x19 : | 12 | 10400 | 1733 | £13.71 | WS19-120 |
| 14mm 1x19 : | 14 | 14170 | 2362 | £23.36 | WS19-140 |
| 16mm 1x19 : | 16 | 18560 | 3093 | £29.99 | WS19-160 |
1x19 Wire Rope Characteristics
The 1x19 construction 316 grade stainless steel wire rope is stronger than other types of stainless steel cable and has less stretch. This also means it is non flexible.
1x19 stainless steel wire rope is often used in yacht and sail boat rigging, architectural structural rigging and balustrading.
1x19 construction wire rope does not allow for kinks or bends.
Loading
Wire Rope Load Definitions and Explanations
Break Load = The stress which, when steadily applied to a structural member, is just sufficient to break or rupture it. Also known as ultimate load.
SWL (Safe Working Load) = Briefly defined, the "safe working load" of a line is the load that can be applied without causing any kind of damage to the wire rope. Note that the safe working load is considerably less than the breaking strength.
Factors of safety should always be applied when calculating maximum wire rope loading conditions. In cases of doubt, an engineer should be consulted to assess the loading and advise on suitable factors of safety to ensure that overloading cannot occur.
The SWL is calculated using a given safety factor, SF, which for S3i Ltd, is provided as 6:1
Ordering
You can order any length of 1x19 stainless steel wire rope you require - there is no minimum order quantity.
Step 1: Choose the diameter of wire rope you require from the drop down menu
Step 2: Type the exact length in METRES into the Length box
Step 3: Type the number of wire ropes required at this length
Step 4: Click "Add To Cart"
Result: The exact cost of each length of wire will be shown in "Your Basket" as well as a quantity total.
Fax, or email large order enquiries; we will quote our best prices.
Technical
Wire rope and strand are manufactured from high tensile, high quality AISI 316 stainless steel grade 1.4401 in fully austenitic condition to give maximum corrosion resistance.
Wire rope dimensions and stainless steel tensile grades conform to BS MA 29 which stipulates tolerances on nominal diameter and minimum tensile strength for wire rope sizes amd minimum breaking forces for strands and ropes.
Full certification of conformance is available, please call to request this.
Search across all our websites here:
Prices displayed do NOT include VAT.
VAT will be added at CHECKOUT
turnbuckles & rigging screws....
stainless steel wire rope assemblies....
